Hoisting plug TAN-3 / TAN-6

A hoisting plug is the appropiate tool to set the rods in their drilling position and to help extracting the drill string.

On its upper part (Hoist) is fitted to the rig main winch cable and in its lower part (Thread) to the rod to be placed or extracted from the hole.

It’s essential to choose the correct Hoisting plug according to the load to be pulled out. The thread connection to the rod must be kept in perfect conditions.

TECSO, S.A. offers two types of Hoisting plugs:

  • TAN-3: suitable for geotechnical investigation or shallow holes. Direct connection to type of rod. It’s manufactured including a side air/water hose connection for use it as a core extracting device. It’s recommended for loads up to 6,000 kg.
  • TAN-6: suitable for deep holes or mining works.

It’s thread is NW box and requires adaptors for different type of rods. It’s recommended for loads up to 20,000 kg.

    Download products catalog

    Fill out and submit the following form and you can proceed to download the requested catalog.

    Name (required)


    E-mail (required)

    I agree to receive commercial communications from the companies of the TECSO Group.

      I have read and accept the data protection policy.

    The personal data that you are providing in the previous form will be sent by email and used to contact you, being stored in an automated file.
    Basic Information on Data Protection
    Responsible: TECSO, S.A.Purpose: Obtaining data of download of document and that a person puts itself in contact if it was necessary.Legitimization: consent of the interested party, by marking the box and sending the form.Addressee: TECSO, S.A. Rights: access, rectification, limitation, opposition and / or deletion of your data, through the mai: carrasco@tecso-sa.com, as well as the right to file a claim with a supervisory authority.More information: You can consult detailed information about Data Protection in www.tecso-sa.com/politica-privacidad/